CNC Milling Services

Our machining centres cover the full range of milling operations — profiling and facing, pocketing, slotting, drilling, tapping and thread milling, boring, engraving, complex 3D contours and multi-face machining in a single setup. Most parts leave the machine complete, with no secondary operations needed.

Danca can accommodate milling work within an approximate machining envelope of 1000 × 600 × 500 mm. The practical maximum component size depends on its geometry, material, required tolerances, workholding and the number of faces being machined. Send us your drawing and we can confirm whether the part is suitable for our equipment.

Achievable tolerance depends on the material, geometry and size of the component — a thin-walled plastic housing behaves differently to a solid steel block. As a working guide, we hold ±0.02mm on critical dimensions where the material and geometry allow, verified by inspection under our ISO-accredited quality system. Tell us which dimensions are critical on your drawing and we'll machine and inspect to suit — over-tolerancing every dimension only adds cost.

Yes — both, and everything in between. We machine one-off custom parts and prototypes (often working from a concept or a worn sample rather than a finished drawing), low-volume batches for pilot production, and full repetition runs into the thousands. Because the prototype and the production run happen on the same machines under the same quality system, what you approve at prototype stage is exactly what arrives at volume.

Yes. Most milling work runs on our 3-axis and 5-axis vertical machining centres — 3-axis for prismatic parts, 5-axis where multiple faces or compound angles need machining in one setup. For the most complex components — combined milled and turned geometry finished in a single cycle — jobs move to our nine-axis machines.